Molybdenum rod

Molybdenum rods have high melting point, good thermal conductivity and low thermal expansion properties. At high temperatures, it can resist oxidation and have high strength. Molybdenum rods and molybdenum rods are manufactured, and different lengths can be provided according to customer needs. In addition, there are three different surface treatments depending on the end use of the molybdenum rod. CTOMS produces pure molybdenum rods and lanthanum-doped molybdenum rods. Doped lanthanum-molybdenum rods have a smaller cross-section after recrystallization and can maintain ductility at higher temperatures.

Category: Molybdenum products

key word : Molybdenum rod

Mobile:+86-13903792565

Mobile:+86-13503495123

Message Contact

Product Details

Brand::Mo1 MH1 TZM

Standard: GB/T4188-1984

Surface condition: black, alkaline wash, car light, polished.

Uses: Mainly used in the manufacture of electric vacuum parts, guide rods, electrodes, lead wires, high temperature parts, furnace heating rods, etc.

Name	Diameter	Tolerance
Forged molybdenum rod	>80mm	/-2.0mm
Forged molybdenum rod	25mm-80mm	/-1.0mm
Molybdenum rod swaged	10mm-25mm	/-0.2mm
Molybdenum rod swaged	3.0mm-10mm	/-0.1mm
Car light molybdenum rod/rod	>20mm	/-0.2mm
Straightening molybdenum rod	0.5mm-3.0mm	/-0.03mm
polished molybdenum rod/rod	0.8mm-50mm	/-0.2mm